Sparkling – the trading app that comes with an agent.

Every trader deserves an agent.

What is Hyperliquid and how do you trade it on Sparkling?

Hyperliquid is an onchain exchange for perpetual futures, with markets on crypto, stocks, indices and commodities. On Sparkling, you can trade perpetual futures on Hyperliquid from your phone: an agent prepares every trade and you confirm it.

What are perpetual futures?

A perpetual future is a contract that lets you bet on the price of an asset going up (long) or down (short) with no expiry date. You can trade it with leverage, which increases both gains and losses, and a periodic payment called the funding rate keeps the contract price close to the asset price. If losses exceed your margin, the position is liquidated.

Long and short positions

A long position on a perpetual future gains when the price rises and loses when it falls. A short position does the opposite. On Hyperliquid, both directions use the same kind of contract, so you can express a bearish view as easily as a bullish one, without borrowing or selling an asset you do not own.

Leverage and liquidation

Leverage multiplies your exposure relative to the margin you put up. With 3x leverage, a position worth 600 USD needs about 200 USD of margin. The same multiplier applies to losses, so a moderate move against you can consume the margin and trigger liquidation, where the venue closes the position.

ItemIllustrative value
Margin you put up200 USD
Leverage3x
Position size600 USD
Price moves 1% in your favour+6 USD, or +3% on your margin
Price moves 1% against you-6 USD, or -3% on your margin
Price falls about 33% against a longThe margin is roughly exhausted; liquidation usually happens slightly earlier because venues require a maintenance margin

Illustrative numbers, not a forecast. Real liquidation levels depend on the asset, the margin mode and the venue's rules.

The funding rate

The funding rate is a periodic payment between long and short traders that keeps the perpetual price close to the spot price of the asset. When longs dominate, longs usually pay shorts, and when shorts dominate, the reverse happens. Funding can add to or reduce the result of a position you hold for a long time, so it belongs in your risk check. The funding schedule is set by the venue, so read it before you trade.

How does Hyperliquid work?

Hyperliquid is one of the largest onchain perps venues by liquidity, with markets on crypto, stocks, indices and commodities. Orders and positions are recorded onchain, and you can trade through different interfaces that connect to it.

Several apps connect to Hyperliquid, and Sparkling is one of them. Perpetual futures on Sparkling are executed via Hyperliquid.

Markets on Hyperliquid

Hyperliquid lists perpetual futures on crypto, stocks, indices and commodities. Perpetual futures on stocks are a separate product from the tokenized US stocks issued by xStocks, which are spot tokens. On Sparkling, the markets you can open depend on what Hyperliquid lists, which can change over time, and on your jurisdiction.

Hyperliquid fees

Hyperliquid charges fees on trades, and the amounts are published in its documentation, so check the current schedule before you trade. Fees can change over time. On Sparkling, every trade card shows the fees before you confirm.

How do you trade Hyperliquid from your phone with Sparkling?

On Sparkling, you write a request in plain language, such as «long ETH with 3x leverage», and the agent turns it into a ready-to-sign trade card with the asset, size, venue, price, estimated slippage, fees and a risk check. You review the card, change it if you want, and confirm with one tap. Nothing executes without your confirmation.

You can also trade without writing a word in chat: Sparkling is first of all a full trading app, where you find a setup, set the position size and leverage, and manage the position from the native mobile interface. Trading perpetual futures on Sparkling is gasless.

The Sparkling trade card

When you ask for a trade in chat, the agent builds a card with the same fields every time, and the card goes through the same checks as an order placed in the native interface:

  1. Asset: the token or market you are trading.
  2. Size: how much of your balance the trade uses.
  3. Venue: where the trade executes, for example Hyperliquid for perpetual futures.
  4. Price: the current price the card is based on.
  5. Estimated slippage: how far the fill may move away from that price.
  6. Fees: the charges for the trade, shown before you confirm.
  7. Risk check: a summary of the main risks for that trade.
  8. Confirm: one tap from you. Nothing executes without it.

If a card cannot be built, you see an error and nothing is executed. The agent cannot see your keys or sign transactions.

How do you change or close a position?

You can adjust or close an open perpetual futures position from the native interface, or through chat. A change requested in chat comes back as a new card for you to review and confirm, so every modification of a Hyperliquid position on Sparkling has the same final step: your tap.

Getting started on Sparkling

1

Open Sparkling with your Telegram account. A full web app follows on October 14.

2

Deposit any crypto from any supported network, or buy crypto with a bank card in supported regions. Deposits are gasless.

3

Skip the seed phrase at sign-up: you do not need to write it down, and you can export it at any time.

4

Choose a market in the native interface, or describe the trade in chat.

5

Review the card, change the size or leverage if you want, and confirm.

A typical session

The scenario below is illustrative. A trader deposits 300 USDT, writes «long ETH with 3x leverage» and gets a card showing the asset, the size, Hyperliquid as the venue, the price, the estimated slippage, the fees and a risk check. The trader finds the size too large, lowers it to 100 USDT of margin, and confirms. Later, the trader asks to close the position, receives a new card, and confirms again. At no point does anything execute without a tap.

Checklist before your first perps trade

  • Size: choose a margin you can afford to lose completely.
  • Leverage: start low, because every extra multiple moves liquidation closer to the entry price.
  • Slippage: read the estimate on the card, especially for larger sizes or thin markets.
  • Fees and funding: check the fees on the card and the funding rate for positions you plan to hold.
  • Exit plan: decide in advance when you would close the position, in profit or in loss.

Risks of perpetual futures

  • Liquidation: with leverage, a small price move can wipe out your margin and close the position.
  • Total loss: perpetual futures involve substantial risk, including the loss of all funds, and are not suitable for everyone.
  • Volatility and funding: contract prices and funding rates can change quickly.

Is Hyperliquid available where you live?

Feature availability varies by jurisdiction. Sparkling applies IP-based geoblocking for each service in line with our partners' terms and applicable restrictions. Using a VPN or other means to circumvent these restrictions violates our Terms of Service.

About Sparkling

Sparkling is the trading app that comes with an agent: swaps, perps and prediction markets from one self-custodial balance. AI preps every move. You confirm.

Sparkling connects you to Hyperliquid for perpetual futures, to xStocks for tokenized US stocks and to Bebop for swaps, from one self-custodial balance. Your keys stay with you, secured by Turnkey, and every transaction is signed by you.

Frequently asked questions

What is the relationship between Sparkling and Hyperliquid?

Sparkling integrates Hyperliquid: perpetual futures on Sparkling are executed via Hyperliquid, and your account stays self-custodial.

Is Sparkling self-custodial?

Yes. Every account is created with a seed phrase you can export at any time, keys are secured by Turnkey, and every transaction is signed by you.

What are the fees on Sparkling?

Sparkling charges a fee on trades, and every trade card shows the fees before you confirm.

Do I need Telegram to use Sparkling?

No. Telegram is one way in, and a full web app follows on October 14.

What is leverage?

Leverage lets you open a position larger than your margin. It multiplies gains and losses alike, and a position can be liquidated if losses exceed the margin.

Does the agent trade for me?

No. The agent prepares every trade and you confirm it. Nothing executes without your confirmation.

Can the agent access my funds?

No. The agent cannot see your keys or sign transactions. Keys are secured by Turnkey, and every transaction is signed by you.

What happens if the agent gets it wrong?

You see every parameter before confirming and can change or reject the trade. If a trade card cannot be built, you see an error and nothing is executed.

Can I close a Hyperliquid position through chat?

Yes. You can change or close open positions through chat, and each change comes back as a new card that you confirm.

Partners

Built on a tried-and-tested infrastructure

Sparkling provides liquidity, trading and identity verification through a small group of deeply integrated partners.

xStocks

xStocks

Tokenised shares — 24/7 on-chain access to shares.

Polymarket

Polymarket

Prediction markets — take a position on real-world events.

Lighter

Lighter

A futures exchange with zero-knowledge proofs and order-book-level execution.

NEAR

NEAR

Chain abstraction and intent-based transactions — cross-chain settlement without manual bridges.

0G

0G

A blockchain designed for AI agents — computing, data storage and availability in a single stack.

Bebop

Bebop

Smart order routing — any token, any size, prices from multiple exchanges.

Your wallet is ready

Log in in under a minute and start trading with your broker.

Open Sparkling ↗

Author: George Kasparyants · Published: 8 October 2026

Updated: